2.OncetheRadarhaspoweredup,selectTxto
starttheRadartransmitting.
PuttingtheRadarintoStandby
TheRadarcanbeplacedintoStandbymode,which
allowstheRadartoremainpoweredupbutnot
transmitting.
WiththeRadartransmitting,fromtheRadar
application:
1.SelectMenu.
2.SelectRadar:sothatStandbyisselected.
PoweringdowntheRadarscanner
WhentheRadarispoweredupitcanbepowered
downusingtheRadarapplicationmenu.
WiththeRadarpoweredup,fromtheRadar
application
1.SelectMenu.
2.SelectPowerdownradar.
Usingthepowerbuttontoswitchoperating
modes
Theradaroperatingmodescanalsobesetusingthe
multifunctiondisplaysshortcutpage.
1.PressandreleasethePowerbutton.
Ifyouhave2radarscannersconnected;options
foreachradarscannerwillbeshown.
Theshortcutspageisdisplayed:
2.SelectPowerupradar(s)toturnonconnected
radars,orPowerdownRadartoturnoffthe
selectedradar.
SelectingPowerupradar(s)willpowerupall
radarsconnectedtothenetwork.
3.SelectTransmittostarttheradartransmitting,or
Standbytostoptheradartransmitting.
Radarapplication
315