Rayto RT-7600S - How to Use This Manual

RT-7600S Auto Hematology Analyzer User’s Manual
2
How to use this manual
Thank you very much for being the user of RT-7600S Auto Hematology Analyzer.
In order to get best test result, before doing clinical test, you shall be familiar with this
analyzer and its performance. This user’s manual is the using guidline of RT-7600S Auto
Hematology Analyzer from Rayto, including installation, daily test, QC and daily
maintenance.
The functions of insrtruments with difference versions or configurations may be
different. The content of user’s manual may be different because of upgrade, we will
not give notice seperatlly. If you have any question, please contact the distributor.
Please reserve all packing materials for storage, transportation and return to fctory for
maitenance.
If any problems come into existence, please contact the distributors
Note
Note prompts, advice or suggestion, using italic.
Warning
Warning warnings must be followed strictlly to make sure the normal
performance of instrument and the accuracy of test result.
Declaration
Rayto reserves the Power of Interpretation to this user’s manual.
The figures in the manual is only for demostration, they may be different form the actual
display, please according to the actual display. Unless been authorised by Rayto, No person
or orgnization has the right to copy, modify or translate this user’s manual.
Only that all the following requirements are met, Rayto will be responsible for the safty,
reliability and performance of the product.
 Install, adjust, update and repaire are done by Rayto authorised person.
 Operation of instrument followed the user’s manual strictlly.

Electric environmentmeet the requirements.
Note
 This instrument shall be operated by prefessional of medical inspection or trained
doctor, nurse and experimentalist.
Warning
 If the orgnization which are using this instrument can not finish a satisfactory
maintenance/ repair plan for the instrument, it may cause abnomal fault to the anlyzer
even endanger the health of operator.
 The analyzer must be operated under the stated conditions, if not, it may cause