RT-7600S Auto Hematology Analyzer User’s Manual
7.2.3 Panic limits
When parameter value exceeds normal value range, it does not definitely indicate that the
subject is patient, when it falls within panic limits, the conclusion has to be made on specific
case. Click “Panic limits” button, open setting menu as follows:
Fig.7-6 Panic limits
Reference range of each parameter has been set before delivery of instrument, to modify
parameter reference range, you can select blood type and population category, and fill in
parameter lower limit and upper limit blanks, click “Save” button.
7.2.4 Units
To change parameter unit, click “Units” button, open Units setting menu as follows:
Fig.7-7 Units setting
Totally units of 10 parameters can be set, WBC, LYM#, MID#, GRA# use the same unit.
To Next Page
Loading...
