15
razberi™ Technologies
3.6.1.1 Adding Sites
1. To add multiple sites to a profile, access the Camera Tree and right-click on the Sites folder. A list of available
options displays. (See figure 11)
Figure 11
2. Click Add New Site. A new Login Form dialog box displays. Use the Discover Server or type in the server
information to login to the new server as a secondary server. The same server cannot be connected more than
one time.
3. The secondary site appears below the primary site in the Camera Tree. Click on the Site folder to view the
available cameras connected to the site.
3.6.1.2 Connecting Sites
If a site is disconnected, the site address displays in red in the Camera Tree.
1. To connect a site, access the Camera Tree and right-click on the disconnected site. A list of options displays.
2. Click Connect Site. (See figure 12)
Figure 12
NOTE: Sites may be offline due to a network connectivity problem.
3.6.1.3 Disconnecting Sites
1. To disconnect a site, select the site from the Camera Tree and right-click the site name. (See figure 13)
2. Select Disconnect Site from the list of available options. When a user disconnects a site, all of the cameras
disappear and the icon displays in red.
Figure 13
To Next Page
Loading...
General