18
razberi™ Technologies
Each video display has options in the bottom right corner.
- Indicates recording video from the camera
- Closes the video display from that camera
- Shows PTZ functionality if the camera is a PTZ
NOTE: The PTZ option does not display if the camera is not a PTZ.
Double-click on a video display to make the video fill the display area. Double-click the video display again to return to the
previous layout. Right-click, on a video display, to view a list of available options. (See figure 18)
Figure 18
Replay - Replays the past minute of recording time
Snapshot - Takes a picture of the current video display frame
Refresh - Refreshes the video display
Information - Provides the camera and site information
Display Server Name - The site name for the camera appears in the video display
Display Timestamp - The date and time of the video appears in the video display
3.8 Live Video Layout
Use the Layout icon to change the viewing layout of the live video display. The Layout icon is located in the Tool Bar. Click
the icon to see a list of available layouts.
Possible layouts include:
1 x 1 - Shows a single video in the display area
2 x 2 - Shows four videos in the display area
2 x 3 - Shows a horizontal six video display
3 x 2 - Shows a vertical six video display
3 x 3 - Shows a nine video display of three rows and three columns
4 x 4 - Shows a sixteen video display of four rows and four columns
To Next Page
Loading...
General