REA VERIFIER
© REA Elektronik GmbH, 64367 Mühltal, Germany --- REA MLV-2D Manual Version 3 – 21/12/2015
Page 29 of 98
A search window appears, depending on settings (section 4.6) and shows available
devices.
A device is selected by clicking and confirming with OK. To identify the devices, the
name can be changed, and the MAC address (system information, see section 4.6.11)
or the IP address (on the display, shown on the start screen) can be compared.
Once a connection is established, the device display appears and all menus and
measurement icons are available.
Measurements are performed by following the instructions in sections 5 and 7.
To Next Page
Loading...
Need help?
General
