REA VERIFIER
© REA Elektronik GmbH, 64367 Mühltal, Germany --- REA MLV-2D Manual Version 3 – 21/12/2015
Page 41 of 98
7.3 Device positioning
The REA MLV-2D can be operated in a variety of measurement positions.
7.3.1 Camera pointing down
In this mode, the device is placed on a printed sheet (for example) or other flat
products. The camera is set to point downwards. On a printed sheet, the device can
be moved from code to code and the measurements are made with the device in this
position. As in this case the device largely covers the measurement area, the effect of
ambient lighting is negligible. Nevertheless, intensive light sources such as direct
sunlight must be avoided.
Figure: Camera on printed sheet, pointing down
To Next Page
Loading...
