REA VERIFIER
© REA Elektronik GmbH, 64367 Mühltal, Germany --- REA MLV-2D Manual Version 3 – 21/12/2015
Page 82 of 98
11.2 Reflectance adjustment
Reflectance adjustment is performed using the four fields located inside the
"Reflectance calibration field". The four reflectance values that have been entered into
the "Reflectance values target" field must be checked and also entered into the
software if the values in the application are different.
Figure: Reflectance values given on the reflectance calibration card
Figure: Application menu for reflectance adjustment
To Next Page
Loading...
Need help?
General
