To Next PageTo Next Page
Need help?Do you have a question about the Record RIC 290 and is the answer not in the manual?
General| Brand | Record |
|---|---|
| Model | RIC 290 |
| Category | Accessories |
| Language | English |
Defines the intended applications and limitations for the combi sensor.
Provides FCC compliance and usage guidelines for the microwave sensor in the US.
Instructions on how to open the sensor's casing to access internal components.
Guidance on horizontal sensor placement for optimal detection field alignment.
Table with installation heights and field widths for different sensor configurations.
Instructions on using the drilling template for accurate sensor mounting.
Steps for connecting the CAN cables to the sensor module.
Warning about handling electronic parts to prevent electrostatic discharge damage.
Method for adjusting cable length and securing it for strain relief.
Explains CAN bus system, termination, and cable usage.
Details DIP switch functions for sensor identification and bus addressing.
Instructions for carefully plugging in CAN cables and ensuring proper termination.
Guide on using the FPC 902 programmer for sensor setup and configuration.
Overview of accessing and setting sensor parameters via the FPC 902 menu.
Instructions for adjusting the sensor's tilt for optimal detection zone coverage.
Method for adjusting the antenna's horizontal field coverage.
Specifies minimum field depth requirements for emergency exits.
Using the FPC 902 for quick scene selection and parameter adjustments.
Table detailing settings for various RAD pre-programmed scenes.
Instructions for removing the protective film from the presence detector's optic module.
Guidance on adjusting the AIR optic module's tilt angle for light curtain placement.
Standards compliance for presence detector application on sliding doors.
Table detailing settings for various AIR pre-programmed scenes.
Guide to setting the presence detection field width using predefined patterns.
Methods for testing and adjusting detection field settings.
Using a scale to test and verify the sensor's detection field position.
Instructions on adjusting the sensitivity of the radar motion detector in steps.
Explains the difference between narrow and wide sensing fields.
Illustrates detection zones with varying sensitivity and narrow field settings.
Illustrates detection zones with varying sensitivity and wide field settings.
Configuration for auto-mode and detection of slow movements.
Explains stereo and mono modes for detecting movement direction.
Function to detect movements away from the radar sensor.
Setting the delayed disconnection time after leaving the sensing field.
Adjusting sensitivity for increased detection but reduced interference resistance.
Enables blinding the door leaf movement during learning to prevent ghosting.
Reduces detection field size for better toddler detection.
Description of the 5 stages of filter setup for the presence detector.
Settings for the auto-adaptation time, affecting background learning.
How to set sampling frequency, especially when multiple sensors are used.
Option to enable/disable background checking and influencing factors.
Adjusting the depth of the presence detection field by selecting rows.
Performing sensor learning using the SFT button interface.
Sensor learning procedures using BDE-D or EPC 903 programmers.
Loading default parameters for a selected scene, overwriting current settings.
Resetting all sensor parameters to factory defaults.
Summary table of RAD pre-programmed scenes with key parameters.
Summary table of AIR pre-programmed scenes with key parameters.
Detailed view of the 'Normal operation' scene for RAD sensor.
Detailed view of the 'Supermarket' scene for RAD sensor.
Detailed view of the 'Nursing home' scene for RAD sensor.
Detailed view of the 'Pavement' scene for RAD sensor.
Detailed view of the 'Niche' scene for RAD sensor.
Explanation of the 'Interior door' pre-programmed scene.
Explanation of the 'Exterior door, installation inside' scene.
Explanation of the 'Outside, protected exterior door' scene.
Explanation of the 'Outside, unprotected exterior door' scene.
Explains the LED status indicators for the RAD motion detector.
Explains the LED status indicators for the AIR presence detector.
Describes functions triggered by light pulses on the RAD sensor's SFT button.
Describes functions triggered by light pulses on the AIR sensor's SFT button.
Instructions for mounting the lower part of the sensor housing.
Guide for cleaning the sensor's optical components, such as lenses.
Lists potential interferences like weather, leaves, lighting, and vibrations.
Table listing common symptoms, causes, and remedies for sensor errors.
Explains 4-digit error codes on CAN bus, indicating reasons and unit names.
Provides general technical data for RIC 290 A, including voltage, power, and protection class.
Technical details specific to the RAD motion detector component.
Technical details specific to the AIR presence detector component.
Technical data for RIC 290 G, including voltage and temperature range.
Visual representation of RIC 290 G dimensions and mounting template.
Labeled diagram identifying parts of the RIC 290 A sensor housing.
Lists and illustrates available accessories like mounting plates and weather shields.
