Detection of slow movements in
the range of the sensing field.
Normally enabled.
Default: 1 (Auto-mode ON)
Stereo: Detects only move-
ments towards the radar.
Movements away from the ra
are not detected.
Mono: Detects all movements
D
efault: 1 (Stereo)
Detects movements away from
the radar.
(only in “stereo” mode, not
available for AKI on redun-
dant door controls).
Default: 0 (disabled)
Retarded disconnection of out-
put signal after leaving the
sensing field. Adjustable in
steps from 1 to 12.
ANSI 156.10: 1.5 s (15)
Default: 0.6 s (3)
7.4
Auto-mode, Slow-motion
7.5
Detection of movement directions (stereo/mono)
7.6
Direction reversal
7.7
Hold time
To Next Page
Loading...