Record RIC 290 - Functions; SFT Sensor Learning; BDE-D;EPC 903 Sensor Learning; Loading Default Scene Parameters



 11.2
Mode of operation Hold open
SFT
2nd light pulse:
Learning sensor for single sensor.
Movements in the radar field during the sensor
learning disturb the measuring and shall be
prevented. The sensor learning must be repeat-
ed, if settings of the sensor or of the door have
been modified or if people moved in the detec-
tion field during the learning.
Mode of operation Automatic
While the door is closing the sensor is learning
the door moving. When the door closes thor-
oughly and the LED of the sensor stops flashing,
the sensor learning is completed.
Mode of operation Hold open
SFT
4th light pulse: Configuration mode (technical
level)
Learning sensor for single sensor
Exit the menu
Mode of operation Automatic
While the door is closing the sensor is learning
the door moving. When the door closes thor-
oughly and the LED of the sensor stops flashing,
the sensor learning is completed.
Default parameter loading of
preselected scene.
All the parameters of the pre-
selected scene are over-
written in the process.
This function cannot be re-
verted!
Factory settings of
programming.
All the parameters of the sen-
sor are overwritten in the pro-
cess.
This function cannot be re-
verted!
9.2
9
FUNCTIONS:
Sensor learning with SFT
9.1
Learning sensor with BDE-D or EPC 903
9.3