RED DSMC OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC
955-0020_V5.1, REV-H | 91
SYSTEM STATUS
The System Status menu displays key project and system information on the following tabs: Project Status,
Module Status, Camera Info.
PROJECT STATUS
Displays the currently selected camera and project settings.
MODULE STATUS
Displays which modules are attached to the BRAIN.
Not Detected: The module is either not attached, or is not detected by the BRAIN.
Attached: The module is attached and detected.
CAMERA INFO
Displays the following camera information:
Model: Includes camera type (EPIC or SCARLET) and sensor type.
Version: Current firmware version.
P.I.N.: The personal identification number that is specific to your camera.
SVN revision: The current revision number of your firmware.
Hours of operation: The number of hours that your camera has been turned on.
MEDIA INFO
Displays the following media information:
Media Status: Active media, module type.
Media Name: Storage capacity, SSD type, and version/revision of the SSD.
Serial Number: Serial number of the SSD.
Media Firmware Revision: Firmware version on the SSD.
Media Size: Total capacity on the SSD.
Media Space Available for Recording: Total capacity left on the SSD that can be recorded to.
Maximum Data Rate: The maximum data rate when writing files to the SSD.
NOTE: When an SSD is not attached, the Media Info tab displays the following: “No Active Media Found”.
To Next Page
Loading...
Need help?
General
