Redball 680 - Wheel Lug Nut Torque

11-01
680 High Clearance Sprayer - Maintenance, Service &
Troubleshooting
Section E
Wheel Lug Nut Torque
When receiving your sprayer or replacing a tire, follow
these steps for insuring proper lug-nut torque:
1. Tighten lug nuts to correct torque specifica-
tions using a criss-cross pattern.
Size
Torque ft./lbs.
3/4-16 UNF 250 - 265
5/8-18 Bolt 140 - 170
2. After tightening, pull the Redball® 680 High
Clearance Sprayer approximately one (1) mile.
3. Retighten lug nuts to correct torque specs.
4. Use the sprayer, stopping after three (3) hours
and again after ten hours to retighten lug nuts
to correct torque specifications.
5. At regular maintenance intervals recheck lug
nut tightness.
Again, we recommend checking lug nut torque at regular
maintenance intervals to insure proper wheel tightness
on you Redball
®
680 High Clearance Sprayer.
4
Section E
Failure to check and maintain the proper lug nut torque could
result in elongation of rim and/or broken lug-bolts. We recom-
mend checking lug nut torque at regular maintenance intervals to
insure proper wheel tightness on your Redball
®
680 High
Clearance Sprayer.
NOTE
DO NOT lubricate threads.
NOTE
DO NOT use undersized tires. Use the right size tires
for the job and properly match tires to wheels.
NOTE