Redball 680 - Page 9

11-01
680 High Clearance Sprayer - Safety Instructions
Section A
4
Section A
11. Do not replace components or parts with those
other than genuine Redball
®
Factory Service Parts.
To do so may reduce the effectiveness of safety
features or decrease the accuracy of the unit.
12. Read the Operator Instructions
section of this manual for further
necessary information relating to
the safe operation of the
applicator.
Certain chemicals can be very corrosive and may oxidize steel
over a period of time. This weakens steel parts and can cause
failure to perform as intended, resulting in possible safety haz-
ards. Periodically check all safety shields and structural mem-
bers for corrosion. Replace or repair anything that could cause a
potential safety hazard.
WARNING
HHiigghh
Cllearrannce
SSprrayyerr