Renault F9Q - Page 536

13B-24
DIESEL INJECTION
Camshaft position sensor: Removal - Refitting
F9Q
13B
a Remove:
-the bolt (6) from the camshaft position sensor,
-the camshaft position sensor.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the camshaft position sensor.
a Connect the camshaft position sensor connector.
II - FINAL OPERATION
a Refit the EGR bypass control solenoid valve.
a Torque tighten the EGR bypass control solenoid
valve bolts (10 N.m).
a Connect:
-the EGR bypass control solenoid valve connector,
-the turbocharger control solenoid valve connector,
-the EGR solenoid valve connector.
a Refit the engine cover.
135991