19A-100
COOLING
Electric water pump: Removal - Refitting
F4R
19A
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the electric coolant pump.
a Connect
-the electric coolant pump connector,
-the electric coolant pump hoses.
a Position the clips on the electric coolant pump hoses
using the tool (Mot. 1448).
a Remove the tools (Ms. 583) from the cooling hoses.
II - FINAL OPERATION
a Refit:
-the electric coolant pump clips,
-the engine undertray.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
a Perform the following operations:
-top up the coolant level,
-bleed the cooling system (see 19A, Cooling, Coo-
ling circuit: Draining - Refilling, page 19A-17) .
To Next Page
Loading...
