TYRES
6
342 - Practical advice
Vehicle equipped with a jack with a
heightener
When changing a front wheel, use the
heightener
1
(figure
A
).
When changing a rear wheel, remove
the heightener
1
(figure
B
).
Using the jack
Topreventanyriskofin
juryordamagetotheve
hicle, only crank the jack
until the wheel you are
replacingisamaximumof3cen
timetres off the ground.
Remove the jack
2
located in the tool
kit. Familiarise yourself with the jack
arrangement prior to using it.
Front jack support point
3
Position the jack
2
horizontally. The
head of the jack must line up with the
point
3
provided.
To Next Page
Loading...
