Renesas RZ/A Series - Page 42

RZ/A2M SUB Board RTK79210XXB00000BE 2. Function specifications
R20UT4398EJ0100 Rev.1.00 2-24
2018.10.11
Table 2.3.7 Function Setting Table of DIP Switches SW6-5 and SW6-6 for System Setting
DIP
Switch
Function
ON
OFF
SW6-5
P3_[5 :1] and PH_5, PK_[4 :0] are used as Ethernet
PHY2 control pins (default setting).
P3_[5 :1] and PH_5, PK_[4 :0] are used as FLCTL
pins.
SW6-6
PJ_[7 :6] are used as VDC6 pins (default setting).
PJ_[7 :6] are used as FLCTL pins.
[Note] indicates setting function.