4-1
www.renishaw.com/lp2
Maintenance
Service
You may undertake the maintenance routines described in these instructions.
Further dismantling and repair of Renishaw equipment is a highly specialised operation, which must be
carried out at an authorised Renishaw Service Centre.
Equipment requiring repair, overhaul or attention under warranty should be returned to your supplier.
WARNING: Before carrying out any maintenance operations, ensure that the machine is safe to work on
and electrical power to the interface unit is switched off.
Maintenance
CAUTION: The probe is a precision tool and must be handled with care. The probe is designed to operate
in a machine tool environment. Do not allow chips to build up around the probe body, and do not allow dirt
or liquids to enter the sealed working parts. Keep system mating surfaces clean, and ensure that inductive
transmission gaps are clear. Periodically check the probes rear O-ring, cables and connections for signs of
damage and slackness.
To Next Page
Loading...
Need help?
General
