Renishaw LP2 - Before You Begin; Warranty; CNC Machines; Care of the Probe

1-1
www.renishaw.com/lp2
Before you begin
Warranty
Unless you and Renishaw have agreed and signed a separate written agreement, the equipment and/or
software are sold subject to the Renishaw Standard Terms and Conditions supplied with such equipment
and/or software, or available on request from your local Renishaw ofce.
Renishaw warrants its equipment and software for a limited period (as set out in the Standard Terms
and Conditions), provided that they are installed and used exactly as dened in associated Renishaw
documentation. You should consult these Standard Terms and Conditions to nd out the full details of your
warranty.
Equipment and/or software purchased by you from a third-party supplier is subject to separate terms and
conditions supplied with such equipment and/or software. You should contact your third-party supplier for
details.
CNC machines
CNC machine tools must always be operated by fully-trained personnel in accordance with the
manufacturer’s instructions.
Care of the probe
Keep system components clean and treat the probe as a precision tool.