Renishaw PH10 Series - PHC10-2 Specification

8
Environmental requirements
The following environmental conditions comply with those defined in
BS EN61010 - 1:2001:
Indoor use
IP30 (no protection against water)
Altitude
Up to 2000 m
Operating temperature PH10:
PHC10-2:
+10 °C to +40 °C
0 °C to +50 °C
Storage temperature
-10 °C to +70 °C
Relative humidity PH10:
PHC10-2:
80 % maximum for temperatures up to +31 °C.
Linear decrease to 50 % at +40 °C
80 % maximum for temperatures up to +31 °C.
Linear decrease to 50 % at +50 °C
Transient voltages
Installation category II
Pollution degree
2
Safety