Renishaw PH10 Series User Manual

42
Maintenance
6 Maintenance
6.1 Maintenance
There are no user serviceable parts inside any PH10 system units. The only
maintenance required is fuse replacement. See page 7 for instructions on fuse
replacement.
Units requiring attention must be returned to an authorised Renishaw customer service
centre.
6.2 Cleaning
The probe head, controller and hand control unit should be cleaned with a soft, dry, lint-
free cloth.

Renishaw PH10 Series Specifications

General

Brand	Renishaw
Model	PH10 Series
Category	Measuring Instruments
Language	English