Renogy REGO Quick Guide

— 19 —
Power On/Off
Method 1: Through On/Off/Remote Power Switch
OFF: The inverter charger is o.
ON: The inverter charger is on.
The inverter charger uses grid power to directly power AC loads or
appliances without drawing power from the batteries. The grid charges the
connected battery at the same time.
The inverter charger prioritizes charging the batteries or supplying power to
the loads from the grid based on the AC Output Priority. In this mode, the
grid and batteries can work together to power loads up to a combined load
of 6000W.
REM: Turn on or o the inverter charger via the Wired Remote Control.
Method 2: Through Wired Remote Control
Push the On/Off/Remote Power Switch to the REM position. Press the RMS-P button to power on or off the
inverter charger.
ON ERR
RMS-P2
The inverter charger is o.
The inverter charger uses grid power to directly power AC loads or
appliances without drawing power from the batteries. The grid
charges the connected battery at the same time.
The inverter charger is on.
The inverter charger prioritizes charging the batteries or supplying
power to the loads from the grid based on the AC Output Priority.
In this mode, the grid and batteries can work together to power
loads up to a combined load of 6000W.
ON
ON

Renogy REGO Specifications

General

Output Voltage	12V/24V
Output Current	20A
Charging Algorithm	Multi-stage (Bulk, Absorption, Float)
Battery Compatibility	Flooded, Lithium
Operating Temperature	-20°C to 50°C
Protection	Over-voltage, Short-circuit, Reverse polarity
Communication	Bluetooth
Cooling Method	Fan