Renogy REGO Quick Guide

— 1 —
What
’
s In the Box?
REGO 12V 3000W HF Inverter Charger × 1
Quick Guide × 1
VERSION A0
HF Inverter Charger
REGO
12V 3000W
RIV1230RCH-SPS
QUICK GUIDE
Self-tapping Screws x 8
(2 extra)
ST6.3 x 1.8 x 13 mm
Dry Contact Relay
Connector × 1
Wired Remote Control x 1
ON ERR
RMS-P2
RJ12 Cable (5m) x 1
Battery Voltage
Sensor × 1
Battery Temperature
Sensor x 1
Make sure that all accessories are complete and free of any signs of damage.
Required Tools
Phillips Screwdriver (#2) Socket Wrench (17/32 in)
13 mm
Measuring Tape
3
4
5
6
Wire stripper
Slotted Screwdriver (1 mm)
Insulating Gloves
13 mm
Prior to installing and configuring the inverter charger, prepare the recommended tools, components,
and accessories.

Renogy REGO Specifications

General

Output Voltage	12V/24V
Output Current	20A
Charging Algorithm	Multi-stage (Bulk, Absorption, Float)
Battery Compatibility	Flooded, Lithium
Operating Temperature	-20°C to 50°C
Protection	Over-voltage, Short-circuit, Reverse polarity
Communication	Bluetooth
Cooling Method	Fan