Reolink C1 User Manual

24
Check the box to enable DDNS.
 DDNS Server Type: Choose the DDNS server.
 Server Domain Name: Enter the host name that you set up in your DDNS service.
This is the address you use to access your network.
 User Name: Enter the username you set up with your DDNS server.
 Password: Enter the password you set up with DDNS server.
 Confirm Password: Re-type the password to confirm.
Click OK to save and enable settings.
NOTE: If test is unsuccessful, a message will appear onscreen informing you that “Update
was Unsuccessful”. This could mean that there’s a problem with your network setup, or
there’s a problem with the DDNS Account Name and Password you’re using.
NTP Setup

Reolink C1 Specifications

General

Frame Rate	20fps
Image Sensor	1/2.7" CMOS
Wireless Standard	IEEE 802.11b/g/n
Operating Frequency	2.4GHz
Wireless Security	WPA/WPA2
Protocols	HTTPS, SSL, TCP/IP, UDP, HTTP, IPv4, UPnP, RTSP, RTMP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Storage	Micro SD card (up to 128GB)
Operating Temperature	-10° C~+55° C (14° F~131° F)