At a glance
The AirMini system includes the AirMini machine, a power supply unit, a drawstring bag, and one of
the following:
• AirMini setup pack - F20: air tubing and F20 connector
• AirMini setup pack - N20: air tubing, N20 connector, HumidX™ and HumidX Plus
• AirMini mask pack for P10: air tubing, AirFit™ P10 for AirMini mask (M), P10 cushion (S), P10
cushion (L), HumidX, HumidX Plus and AirFit P10 headgear clips
The AirMini system
The AirMini system is comprised of the AirMini machine and one mask pack.
A AirMini machine 6 20W power supply unit
B F20 connector for AirMini and air tubing 7 F20 connector for AirMini
C N20 connector for AirMini and air tubing 8 Vent
D AirFit P10 for AirMini and tubing 9 Vent module
1 Start/Stop button 10 Anti Asphyxia Valve (AAV)
2 Power inlet 11 N20 connector for AirMini
3 Air outlet 12 AirFit P10 for AirMini
4 Air filter cover 13 Heat moisture exchanger - HumidX (blue) and HumidX
Plus (grey)
5 Bluetooth
®
button 14 AirMini tubing
The AirMini machine is compatible with ResMed's F20 and N20 series masks and with the AirFit
P10 for AirMini. Ensure that all parts and accessories used with the machine are compatible. For
compatibility information, refer to www.resmed.com for more information.
The AirMini machine is also designed to work with ResMed’s AirMini app. While the AirMini app is
not required to operate the machine, it is essential to clinicians for accessing, viewing and
configuring therapy settings.
AirMini app system requirements
Refer to ResMed.com/AirMiniApp for a list of smart devices compatible with the AirMini app.
In addition, iOS operating system version 9.3.5 (minimum) is required.
See Using clinical mode, Using the device settings menu and AirMini app Dashboard for information
about the AirMini app.
To Next Page
Loading...
Need help?
General
