Retsch AS 200 jet - Type Plate Description

Packaging, Transport and Installation
16
NOTICE
N9.0022
Electrical connection
Failure to observe the values on the type plate
 Electronic and mechanical components may be damaged.
• Connect the device only to a mains supply matching the values on
the type plate.
WARNING When connecting the power cable to the mains supply, use an external fuse that
complies with the regulations applicable to the place of installation.
 Check the type plate for details on the necessary voltage, frequency, and maximum
external current source fuse for the device.
 The listed values must agree with the existing mains supply.
 Only use the supplied power cable to connect the device to the mains supply.
NOTICE The external fuse must amount 16 A (delay-action).
4.6 Type Plate Description
Fig. 1: Type plate
1 Device designation
2 Year of production
3 Part number
4 Serial number
5 Manufacturer’s address
6 CE marking
7 Disposal label
8 Bar code
9 Power version
10 Mains frequency
11 Capacity
12 Amperage
13 Number of fuses
14 Fuse type and fuse strength
1
2
3
4
5
6
7
8
9
10
11
12
14
13