REXROTH A4VSG - Page 24

Company Registered in England No: 4167649 VAT Registration No: 732 5692 25 BS EN ISO 9001:2008 No: LRQ 0964389
+44 (0)1204 699959
enquiries@hyquip.co.uk
Hyquip Limited New Brunswick Street Horwich Bolton Lancashire BL6 7JB UK
www.hyquip.co.uk/web/index
24/60 Transport and storage
Bosch Rexroth AG, RE 92100-01-B/09.2012 Series 10, 11 and 30,
The axial piston units are provided ex-works with corrosion protection packaging
(corrosion protection film).
TableTable 7 lists the maximum permissible storage times for an originally packed
axial piston unit as per data sheet RE90312.
Table 7: Storage time with factory corrosion protection
Storage conditions Standard corrosion protection Long-term corrosion
protection
Closed, dry room, uniform
temperature between +5 °C and
+20 °C. Undamaged and closed
corrosion protection film.
Maximum 12 months Maximum 24 months
Entitlement to warranty will be rendered void if the requirements and storage
conditions are not adhered to or after expiration of the maximum storage time
(see TableTable 7).
Procedure after expiry of the maximum storage time:
1. Check the entire axial piston unit for damage and corrosion prior to installation.
2. Check the axial piston unit for proper function and leaks during a test run.
3. If the storage time exceeds 24 months, the shaft seal ring must be replaced.
After expiry of the maximum storage time, we recommend that you have the axial
piston unit inspected by your responsible Bosch Rexroth Service partner.
In the event of questions regarding repair and spare parts, contact your responsible
Bosch Rexroth Service partner or the service department of the manufacture's plant
for the axial piston unit, see chapter10.5 "Spare parts" on page50.
After delivery