Name: RGBlink CP 3072PRO
Brand: RGBlink
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Chapter 3: Using Your Product

CP 3072PRO User Manual

Version

Show the version of COM, PVW MCU, PVW FPGA, PST+PGM MCU,

PST+PGM FPGA, Optional In 1 MCU, Optional In 2 MCU and Optional In 3

MCU.

Ethernet

Enable or disable the network function. If select “ON”, user can set the IP

address, subnet mask and gateway.

T-BAR Calibration

Step 1: Push the T-BAR to the top.

Step 2: Choose ON.

Step 3: Push the T-BAR to the bottom.

Step 4: Choose ON.

Test

Enable or disable the LED test function and adjust the key value.

3.3.9 Factory Reset Menu

Factory Reset

Select “YES” or “NO”. Select “YES” to restore default settings.

Factory Reset,

Save IP

Select “YES” or “NO”. Select “YES” to restore default settings, but keep the

IP.

->Factory Reset >>

Factory Reset, Save IP >>

Questions and Answers:

Need help?

Do you have a question about the RGBlink CP 3072PRO and is the answer not in the manual?

RGBlink CP 3072PRO Specifications

General