6.2 Software Upgrade
CP 3072PRO supports software upgrade with USB and XTOOL, which compatible with Windows
and Mac osX.
The operations are as follows:
1. Preparation
Upgrade tool installation package: XTOOLSoft_Setup 20161104PM.exe, upgrade cables.
HL-340 USB-RS232 Serial Cable (Male)
Note: HL-340 USB-RS232 serial cable applies to Windows system only.
2. Operation
2.1 Install the XTOOL software.
2.1.1 Double click the XTOOL installation package .
2.1.2 It will pop-up the installer language box, select the language, for example, select “English”,
and click “OK” to confirm.
2.1.3 Click “Next” to install:
To Next Page
