RGBlink CP 3072PRO - Set the Still

Chapter 6: Appendix
CP 3072PRO User Manual
62
6.3.5 Set the Still
Select “Still” in “Toolbox”, it will enter to the window as follows:
Select File: Click “BMP File”, and select the image.
Select BackGround Color: Click “Select BackGround Color” and select the color.
STILL Make: Click “STILL Make”, and save the STILL to the USB disk.
Note:
1. The picture of the sticker format is 24 bits BMP format bitmap, total pixels image size must not
exceed 128 x128.
2. The background to use pure color, with white by default.
3. The generated file number 1 to 50, according to the order generated, cannot be interrupted in
the middle.
4. The generated files stored in the U disk #####\STILL, the directory, not the directory to create
this directory.
5. After completed the USB port of U disk inserted into the device, through the menu operating
the import equipment.
Note: "#####" need to change according to the type of equipment, such as when the equipment
is VENUS X3LIVE "#####" is "X3LIVE","3072PRO" again when the equipment for CP 3072PRO.