3.10 Saving Views
CP 3072PRO provides 36 positions for saving or recording parameters. To save current parameters
and settings:
1. Push the [SAVE] button in Stored Presets Area, the button [SAVE] and [PAGE] lights are lit, and
some of buttons 1~6 are lit and some are flashing. The button lit can be saved and flash will be
overwrite, push the button lit to save.
2. Select PAGE, for example, the button [2] is lit, push the button [2].
3. After set the PAGE, it will jump to BANK option, or example, the button [2] is lit, push the
button [2]:
4. Push the [SAVE] button again, the button light is off, and exit the save function.
5. Select <Backup To UDisk>, user can save the parameters to the UDisk.
To Next Page
Loading...
Need help?
General
