Basic Operation of Copying
• The original in the ADF takes precedence over the original on the exposure glass if you place
originals both in the ADF and on the exposure glass.
• Duplex copying is selected as the default setting.
1. Press the [Home] key.
2. Press the [Copier] icon on the [Home] screen.
3. Place the original on the exposure glass or in the ADF.
To place the original, see page 76 "Placing Originals". If necessary, configure advanced
photocopy settings.
4. To make multiple copies, enter the number of copies using the number keys.
5. Press the [Start] key.
• The maximum number of copies is 99.
• You can select the paper tray for printing out copies in [Select Paper] under copy settings. If you set
the machine to switch between Tray 1 and other trays automatically depending on the paper size
in this setting, you can also specify the tray the machine uses first in [Paper Tray Priority] under the
4. Copying Originals
100
To Next Page
Loading...
