5. Enter the password using the number keys, and then press [OK].
A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock]
under [Administrator Tools] menu.
6. Press [Network Wizard].
7. Press [Wireless (Wi-Fi)].
8. Press the SSID of the router (access point) from the searched SSID list.
9. Enter the encryption key using the number keys, and then press [Connect].
As the passphrase, you can enter either 8 to 63 ASCII characters (0x20-0x7e) or 64 hexadecimal
digits (0-9, A-F, a-f).
10. Check the result.
• Connection has succeeded:
"Connected to access point." is displayed.
• Connection has failed:
"Failed to connect to access point." is displayed.
Check the configuration for the router (access point), and then try the connection again.
11. Press [OK].
12. Press [Exit].
13. Select to display [Network Wizard] menu or not when you turn on the machine
14. Configuring the Wireless (Wi-Fi) settings is complete.
Using the WPS Button
A router (access point) is needed to set up a connection.
Make sure the Ethernet cable is not connected to the machine.
1. Check that the router (access point) is working correctly.
2. Make sure the wireless LAN option is attached to the machine and the wireless (Wi-Fi)
connection is enabled.
Connecting the Machine to a Wireless Network
381
To Next Page
Loading...
