• To use the Internet Fax function, network settings must be configured properly. For details about
network settings, see page 280 "Configuring the Network Settings".
• Internet Fax transmission may take some time before it starts. The machine needs a certain amount
of time to convert data in memory prior to transmission.
• Depending on e-mail environment conditions, you may not be able to fax large images.
• The "Photo" resolution is not available for Internet Faxes. Faxes will be sent using "Detail" resolution
if "Photo" resolution has been specified.
• If the faxes are received on a computer, a viewer application needs to be installed in order to view
the documents.
Basic Operation for Sending a Fax
• The original in the ADF takes precedence over the original on the exposure glass if you place
originals both in the ADF and on the exposure glass.
• If you specify fax original settings for a 2-sided original, place it in the ADF. You cannot send faxes
when placing the original on the exposure glass. You can specify fax original settings in two ways:
[Original Settings] under [TX Settings] on the [Fax] screen or [Fax Original] under [Transmission
Setting] in the [Fax Features] menu. For details about fax original settings, see page 217 "Fax
Features Settings".
1. Press the [Home] key.
2. Press the [Fax] icon on the [Home] screen.
3. Place the original on the exposure glass or in the ADF.
To place the originals, see page 76 "Placing Originals".
4. Select the [Fax] ( ) tab or [Internet Fax] ( ) tab.
5. Select [Address Book], [Manual Entry], or [Redial].
If you select [Redial], confirm the destination, and then proceed to Step 7.
6. Sending and Receiving a Fax
174
To Next Page
Loading...
