Ricoh 132 MF - Fax Function Specifications

Item Description
Protocol • Network
TCP/IP
• E-mail transmission
SMTP, POP
• Scan to Folder
SMB, FTP
• You can use SMB protocol (139/TCP,
137/UDP) or CIFS protocol (445/
TCP) for sending folders with SMB.
• The Scan to Folder function with SMB
protocol (139/TCP, 137/UDP) is
enabled under NetBIOS over TCP/IP
environment only.
• You cannot use the Scan to Folder
function with SMB under NetBEUI.
Fax Function Specifications
Fax transmission and reception
Item Description
Access line • Public switched telephone networks (PSTN)
• Private branch exchange (PBX)
Transmission mode ITU-T Group 3 (G3)
Scan line density • 8 dots per mm × 3.85 line per mm (200 ×
100 dpi)
• 8 dots per mm × 7.7 line per mm (200 ×
200 dpi)
Transmission time 3 seconds (8 dots per mm × 3.85 line per mm,
33.6 kbps, MMR, ITU-T # 1 chart)
Transfer rate 33.6 kbps to 2400 bps (auto shift down system)
12. Appendix
396