SNMPv3 Tab
SNMPv3
Item Description
SNMPv3 Select whether to enable the machine to use SNMPv3 services.
Context Name Displays the context name of the device. The context name is fixed to
"GWNCS".
User Account
Item Description
User Name
(Required)
Enter a user name for the user account. Can contain up to 32 characters.
Security Settings Specify the user account security setting by selecting one of the following:
[Authentication Encryption]: [Authentication Algorithm] and [Encryption
Algorithm] can be specified. It is necessary to specify [Authentication
Password] and [Encryption Password].
[Authentication Non-Encryption]: [Authentication Algorithm] can be
specified. It is necessary to specify [Authentication Password]. [Encryption
Algorithm] and [Encryption Password] cannot be specified.
[Non-Authentication Non-Encryption]: [Authentication Algorithm],
[Authentication Password], [Encryption Algorithm], and [Encryption
Password] cannot be specified.
Authentication
Algorithm
Select an authentication algorithm from the following:
[MD5], [SHA1], [SHA224], [SHA256], [SHA384], [SHA512]
Authentication
Password
(Required)
Enter a password for the user account. Can contain up to 32 characters.
Encryption Algorithm Select an encryption algorithm from the following:
[AES128], [DES]
Encryption Password
(Required)
Enter a password for encrypting the user account password. Can contain
up to 32 characters.
MIB Access Type Select an access type for the user account to access MIB from the following:
[read-only], [Not-Accessible]
Configuring the Network Settings
287
To Next Page
Loading...
