Ricoh 132 MF - Settings You Can Configure in the ICA Dialog Box

Settings you can configure in the ICA dialog box
1 2
3
4
7
8
9
6
5
10 11 12
DYG392
1. Scan Mode:
Select where the original is placed.
• Flatbed
If the original is placed on the exposure glass, select [Flatbed].
• Document Feeder
If the original is placed in the ADF, select [Document Feeder].
2. Kind:
Set the type of original to [Text], [Black & White], or [Color].
[Text] is suitable for scanning originals containing mainly text.
3. Resolution:
Select a resolution from the list.
Note that increasing the resolution also increases the file size and scanning time.
Selectable resolutions vary depending on where the original is set.
• When using the exposure glass:
75, 100, 150, 200, 300, 400, 500, 600, 1200, 2400, 4800 dpi
• When using the ADF:
75, 100, 150, 200, 300, 400, 500, 600 dpi
4. Size:
Specify the original paper size.
The [Use Custom Size] check box appears when [Flatbed] is selected in [Scan Mode:]. If you select this check
box, specify the following items also:
• Rotation Angle:
You can specify how many degrees to rotate the scan image clockwise.
• Auto Selection:
• Detect Separate Items
Basic Operation for ICA Scanning
155