You can scan multiple originals together and store each scan image as a separate file.
• Detect Enclosing Box
You can scan multiple originals placed on the exposure glass and store their scan images as a
single file.
5. Orientation
Select the orientation for originals placed in the ADF or on the exposure glass.
This item does not appear when the [Use Custom Size] check box is selected.
Select [Document Feeder] for [Scan Mode:], [Duplex] appears under [Orientation:]. Select this check box
when you placing two-sided originals in the ADF.
6. Scan To:
Select where to store the scan data.
7. Name:
Name the scan data.
8. Format:
Select the format of the scan data.
• HEIC
• TIFF
• PNG
• GIF
• PDF
• JPEG
• JPEG 2000
• BMP
9. Image Correction:
By selecting [Manual], you can adjust settings such as brightness and contrast.
10. Hide Details
Click to hide the settings.
11. Overview
Click to preview the scan image.
12. Scan
Click to start scanning.
• If the scan data is larger than the memory capacity, an error message appears and scanning is
canceled. If this happens, specify a lower resolution and scan the original again.
5. Scanning Originals
156
To Next Page
Loading...
