Basic Operation of Printing
The following procedure explains how to perform basic printing.
• Duplex printing is selected as the default setting.
When Using Windows
The procedure in this section is an example based on Windows 10 and PCL6 driver. The actual
procedure may vary depending on the operating system you are using.
For details of printing options, see the printer driver Help.
1. Open the printer properties dialog box in your document's application.
For details about how to open the printer properties dialog box, see page 84 "Displaying the
Printing Preferences Dialog Box in an Application".
For details about each setting, click [Help]. You can also click the information icons to show
configuration information.
2. Set printing options as necessary, and then click [OK].
The printer properties dialog box closes.
3. Click [Print].
• When printing a job is restricted, specify the user code in the printer properties of the printer driver
before printing. For details about user code, see page 274 "Restricting Machine Functions
According to User".
3. Printing Documents
86
To Next Page
Loading...
