4. Press [Manual Duplex Scan].
5. Press [OK].
6. Place the original on the exposure glass front side down and with the top to the rear of
the machine.
Place the originals one by one.
7. Press the [Start] key.
A message prompting you to place the original back side down on the exposure glass appears on
the display.
8. Place the original on the exposure glass with the back side faced down and with the top
to the rear of the machine.
9. Press [Start].
When all originals have been scanned, press [Job Finished].
• After you load the original, press the [Start] key within the time specified in [System Reset Timer] or
[System Auto Reset Timer]. Otherwise, the job is canceled. For details, see page 241
"Administrator Tools Settings".
• Sort is not available.
Copying 2-Sided Originals with 2-Sided and Combined Printing
113
To Next Page
Loading...
