2. Press the [Card] icon on the [Home] screen.
3. To make multiple copies, enter the number of copies using the number keys.
4. Place the original with the front side faced down in the upper-left corner of the exposure
glass.
5. Press the [Start] key.
A message prompting you to place the original back side down on the exposure glass appears on
the display.
6. Place the original on the exposure glass with the back side faced down and with the top
to the rear of the machine, and then press [Start].
• Depending on the thickness of the card, shadows may appear around the edges of the copy of the
card.
• For the ID card copy function, you can set the machine to print a line in the middle of the printed
paper. Specify [Center Line] in [ID Card Setting] under [Copier Features].
• You can change the scanning size for the ID card function. Specify [Card Size] in [ID Card Setting]
under [Copier Features].
• After you load the originals, press the [Start] key within the time specified in [System Reset Timer] or
[System Auto Reset Timer]. Otherwise, the job is canceled. For details, see page 241
"Administrator Tools Settings".
Copying an ID Card
115
To Next Page
Loading...
