[Color Document-Better Quality]
[Custom...]
• When using the ADF:
[ADF-Faster]
[ADF-Better]
[ADF-Gray]
[Custom...]
3. Scn. Mode:
Select from full color, grayscale, or black-and-white.
4. Resolution:
Select a resolution from the list. Note that increasing the resolution also increases the file size and
scanning time.
Select from 100, 200, 300, or 600 dpi.
5. Size:
Select the scanning size.
When [Exposure Glass] is selected in [Original:], you can change the scanning size with your mouse in
the preview area. Also, after selecting [User defined], you can select the unit of measure from [cm],
[inches], or [pixels].
6. Duplex
Appears only when [Automatic Document Feeder] is selected in [Original:]. Select the check box when
scanning both sides of the original, and then specify the orientation.
[Options] tab
5. Scanning Originals
148
To Next Page
Loading...
