Delete TX Stand.File
Deletes unsent fax jobs remaining in the machine's memory. The machine can store up to 5 unsent
fax jobs. This function is only performed when selected.
Item Description Value
Delete
Selected File
To delete a fax job, select the desired
job, press [Delete], and then press
[Yes]. Pressing [Exit] without pressing
[Delete] exits to the previous level of
the menu tree without deleting the fax
job.
Delete All Files To delete the fax jobs, press [Delete
All], and then press [Yes]. Pressing
[Exit] without pressing [Delete All] exits
to the previous level of the menu tree
without deleting the fax jobs.
Communication Sett.
Item Description Value
ECM
Transmission
Sets the machine to automatically
resend parts of the data that are lost
during transmission.
• Off
• On
Default: [On]
ECM
Reception
Sets the machine to automatically
receive parts of the data that are lost
during reception.
• Off
• On
Default: [On]
Dial Tone
Detect
Sets the machine to detect a dial tone
before the machine begins to dial the
destination automatically.
(Default may be [Not Detect]
depending on the [Country/Region]
setting under [Administrator Tools].)
• Detect
• Not Detect
Default: [Detect]
Fax Features Settings
221
To Next Page
Loading...
