Transmission Setting
Item Description Value
Immediate TX Sets the machine to send a fax
immediately when the original is
scanned.
• Off
Select this when using Memory
Transmission.
• On
Select this when using
Immediate Transmission.
• Next Fax Only
Select this when using
Immediate Transmission for the
next transmission only.
Default: [Off]
Resolution Specifies the resolution to use for
scanning originals.
"Photo" resolution is not available for
Internet Faxes. Faxes will be sent using
"Detail" resolution if "Photo" resolution
has been specified.
• Standard
Select this when the original is a
printed or typewritten document
with normal-sized characters.
• Detail
Select this when the original is a
document with small print.
• Photo
Select this when the original
contains images such as
photographs or shaded
drawings.
Default: [Standard]
Density Specifies the image density to use for
scanning originals.
Press [ ] to increase the density.
Default: The default setting is the
middle of 3 adjustment levels.
Pause Time Specifies the length of pause time
when a pause is inserted between the
digits of a fax number.
1 to 15 seconds
Default: 3 seconds
7. Configuring the Machine Using the Control Panel
224
To Next Page
Loading...
