Item Description Value
Wireless (Wi-
Fi)
Displays the procedure for manually
connecting to a wireless LAN. It leads
you step-by-step through configuring
the settings for connecting with a
wireless LAN.
–
Wired (Ethernet)
Item Description Value
MAC Address Displays the machine's MAC address. –
Ethernet Speed Displays the current Ethernet speed
setting.
• 100Mbps Full Duplex
• 100Mbps Half Duplex
• 10Mbps Full Duplex
• 10Mbps Half Duplex
• No Ethernet Connection
Appears when a network cable
is not connected.
Set Ethernet
Speed
Specifies the speed for Ethernet
communication. Select a speed that
matches your network environment.
For most networks, the default setting is
the optimum setting.
• Auto Select
• 100Mbps Full Duplex
• 100Mbps Half Duplex
• 10Mbps Full Duplex
• 10Mbps Half Duplex
Default: [Auto Select]
IPV4 Configuration
Item Description Value
IPV4 DHCP Sets the machine to receive its IPv4
address, subnet mask, and default
gateway address automatically from a
DHCP server.
• Active
• Inactive
Default: [Active]
Network Settings
253
To Next Page
Loading...
