Message Causes Solutions
Sort Copy was
Cancelled
The machine's memory reached
capacity while originals were
being scanned from the ADF to
perform sort copying.
Press [Exit] to print the originals that were
successfully scanned into memory. Then,
copy again the originals left in the ADF.
TX Communication
Error
A transmission error occurred,
and the fax could not be
transmitted correctly.
If the [Auto Redial] setting is enabled, the
machine will redial the number and try
again. If all attempts fail, or if the machine
is in Immediate Transmission mode, the fax
will not be transmitted. Try the operation
again.
Unavailable Paper
Type
2-sided copy could not be
performed because the tray
does not contain the valid type
paper, which is thin, plain,
recycled, color, preprinted,
thick 1, letterhead, special, or
prepunched.
• Specify the tray containing the valid
type paper (other than the bypass
tray) in the [Select Paper] setting. See
page 209 "Copier Features Settings".
• Specify the valid paper type for the
tray selected for printing copies. See
page 236 "Paper Settings".
Unsupported Device
Please Remove
The Scan to USB function failed
because a USB device other
than a USB flash disk or a USB
flash disk with an unsupported
file system was used.
Use a USB flash disk that is compatible
with the Scan to USB function.
USB Disconnected
Press Clear key
The Scan to USB function failed
because the USB flash disk was
removed before the operation
could be completed.
Check that the USB flash disk is securely
inserted in the machine. Do not pull out the
USB flash disk until "Ready" appears on
the display.
10. Troubleshooting
332
To Next Page
Loading...
