Paper and Other Media
18
1
If you load a paper size that is not
selected automatically
To load paper whose size cannot be
selected automatically, set the paper
size on the control panel. Follow the
procedure described below to set the
paper size.
A Press the {Menu} key.
The [Menu] screen appears on the
display.
B Press the {U} or {T} key to dis-
play [Paper Input], and then press
the {# Enter} key.
The paper selection menu appears.
C Press the {U} or {T} key to dis-
play [Tray Paper Size], and then
press the {# Enter} key.
The paper tray selection menu ap-
pears.
D Press the {U} or {T} key to dis-
play the target paper tray, and
then press the {# Enter} key.
The paper size selection menu ap-
pears.
E Press the {U} or {T} key to dis-
play the loaded paper size, and
then press the {# Enter} key.
After about two seconds, the dis-
play returns to the menu.
F Press the {Online} key.
The initial screen appears.
This completes the setting change.
Menu:
Paper Input
AGN200S
Tray Paper Size:
Tray 2
Tray 2:
8 1/2 x 13
KirP4GB_Mainte-F5_FM_forPaper.book Page 18 Wednesday, December 8, 2004 6:13 PM
To Next Page
Loading...
