Programming Changing and Deleting a Scan Size
121
4
F Select a vertical size, and then press [OK].
The displayed vertical size differs depending on the selected unit. When [mm]
is selected, [Auto Detect], [210 mm (A4)], [257 mm (B4 JIS)], [297 mm (A3)], [216 mm
(8 1/2)], and [279 mm (11)] are shown. When [inch] is selected, [Auto Detect], [8.3
inch (A4)], [10.1 inch (B4 JIS)], [11.7 inch (A3)], [8.5 inch], and [11.0 inch] are shown.
To cancel a scan size, press [Cancel].
G Press [Exit].
H Press the {User Tools/Counter} key.
Deleting a Scan Size
This section describes how to delete the programmed Scan Size.
A Press [Facsimile Features].
B Press [Administrator Tools].
C Press [Program / Change / Delete Scan Size].
D Press [Delete], and then select [Program Size 1] or [Program Size 2].
E Press [Yes].
To cancel deleting, press [No]. The display returns to that of step
D
.
F Press [Exit].
G Press the {User Tools/Counter} key.
To Next Page
Loading...
