System Settings
44
2
Tray Paper Settings
This section describes the user tools in the Tray Paper Settings menu under Sys-
tem Settings.
Default settings are shown in bold type.
Important
❒ If the specified paper size differs from the actual size of the paper loaded in
the paper tray, a misfeed might occur because the correct paper size was not
detected.
❖ Paper Tray Priority: Copier (copier/Document Server)
Specify the tray to supply paper for output.
The default setting is Tray 1.
❖ Paper Tray Priority: Facsimile (facsimile)
Specify the tray to supply paper for output.
The default setting is Tray 1.
❖ Paper Tray Priority: Printer (printer)
Specify the tray to supply paper for output.
The default setting is Tray 1.
❖ Tray Paper Size: Tray 1-4
Select the size of the paper loaded in the paper tray.
• The paper sizes you can set for tray 1, 3 and 4 are as follows:
A3L, B4 JISL, A4K, A4L, B5 JISK, B5 JISL, A5L, 8KL, 16KK, 16KL
11"×17"L, 8
1
/
2
"×14"L, 8
1
/
2
"×11"K, 8
1
/
2
"×11"L, 5
1
/
2
"×8
1
/
2
"L,
7
1
/
4
"×10
1
/
2
"L, 8"×13"L, 8
1
/
2
"×13"L, 8
1
/
4
"×13"L, 11"×14"L, 8
1
/
4
"×14"L,
8"×10
1
/
2
"L, 8"×10
1
/
2
"K, custom size (140-297 mm (5.52"-11.69")
wide x 182-432 mm (7.17"-17.00") long)
• The paper sizes you can set for tray 2 are as follows:
A3L, B4 JISL, A4K, A4L, B5 JISK, B5 JISL, A5L, B6 JISL, A6L,
PostcardL, 8KL, 16KK, 16KL
11"×17"L, 8
1
/
2
"×14"L, 8
1
/
2
"×11"K, 8
1
/
2
"×11"L, 5
1
/
2
"×8
1
/
2
"L,
7
1
/
4
"×10
1
/
2
"L, 7
1
/
4
"×10
1
/
2
"K, 8"×13"L, 8
1
/
2
"×13"L, 8
1
/
4
"×13"L,
11"×14"L, 11"× 15"L, 10"×14"L, 10"× 15"L, 8
1
/
4
"× 14"L, 8"×10
1
/
2
"L,
8"×10
1
/
2
"K, 8"×10"L, 8"×10"K, C5 EnvL, C6 EnvL, DL EnvL,
3
7
/
8
"×7
1
/
2
"L, 4
1
/
8
"×9
1
/
2
"L, custom size (100-297 mm (3.97"-11.69")
wide x 148-432 mm (5.83"-17.00") long)
The default setting for Tray 1 is A4K / 8
1
2
" × 11"K.
The default setting for Tray 2 is A3L / 11" × 17"L.
The default setting for Tray 3 is B5 JISK / 8
1
/
2
" × 11"L.
The default setting for Tray 4 is B4 JISL / 8
1
/
2
" × 14"L.
To Next Page
Loading...
